PS Engineering PMA6000M Installation Manual download pdf (Page 26)

PS Engineering

PMA6000 Series Audio Selector Panel and Intercom System

Installation Manual

200-066-0100 Appendix D Rev. 1, March 2005

Appendix D Top Connector wiring (Mono), PMA6000, PMA6000C, PMA6000M,

PMA6000M-C

Notes:

Top Connector PMA6000 (monaural)

Swap

Switch

Swap

PASS ICS KEY

COPILOT ICS KEY

PILOT ICS KEY

See Note 4

1. All shields should be grounded at audio panel only.

other end remains floating.

2. All phone and mic jacks must be floating from ground.

3. All wiring to conform to MIL 22750 or 27500.

4. PMA6000 with serial number beginning with "M"

will have PTT intercom capability.

5. Option 1-equipped PMA6000-series have internal recorder

Connect pin 19 to ground through a NO

momentary switch to activate playback.

6. If the Soft Mute inhibit switch is not installed,

install a jumper between pins 12 and N.

7. Keyway is between pins 2 and 3.

IRS PLAYBACK

See Note 5

1 2 ... 21 22 23 24 25 26 27 28

No comments

PS Engineering PMA6000M Installation Manual Page 26